Categories

News

Functional Charcoal Briquette Press Machine Maintenance Introduction
Jul 12, 2018

In the charcoal briquette press machine maintenance process, hydraulic oil maintenance and replacement are important. Pay attention to the lubrication oil volume and do the regular replacement work. Then, how long does it take to change the hydraulic oil from the first use of the hydraulic powder molding  machine? How to maintain the hydraulic carbon powder molding machine?charcoal briquette press machine  

        During the operation process, please make sure the pollution level of hydraulic oil is not lower than the specified pollution level requirement. Generally, after using six months at the first time, the hydraulic fluid should be filtered once or replaced and clean the hydraulic system. The hydraulic carbon powder forming machine after replacing the hydraulic oil should be operated at no load first, and then put into normal production after normal operation.

In addition to the maintenance work of hydraulic oil, we must also pay attention to the following points: do not arbitrarily change the control point of the pressure control relay, so as not to affect the normal operation of the system. Always check that the meter and other components are functioning properly. In short: a good machine is something that every owner who wants to operate and use it loves. Users should carefully maintain it to keep it running at high speed.


  • QR CODE
  • facebook