Application Range: Waste plastic granulation extruder is a device for extruding, cooling and dicing polyethylene (green film, lining bag, etc.) or polypropylene (old woven bag, packing bag, tying rope, etc.) to produce plastic granules. . The granules produced are widely used and are ideal...
Waste plastic granulation extruder is a device for extruding, cooling and dicing polyethylene (green film, lining bag, etc.) or polypropylene (old woven bag, packing bag, tying rope, etc.) to produce plastic granules. . The granules produced are widely used and are ideal investment projects. This equipment is matched with the crushing and cleaning machine and the pelletizer. Broken and cleaned plastic can be directly put into extrusion granulation. Simple process, advanced technology, and suitable for different waste plastics. Waste Plastic granulation extruder adopts automatic temperature control and electromagnetic heating, with less electricity, no pollution and high automation.
It adopts special screw design and different configuration, and is suitable for the production of PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastics for regeneration and color mixing granulation. The high-torque design of the gearbox achieves smooth performance without noise. The screw and barrel are specially hardened, with wear resistance, good mixing performance, high output characteristics, vacuum exhaust or ordinary exhaust port design, which can remove moisture and exhaust gas during production. More stable, the particles are stronger, ensuring good quality .
Waste Plastic granulation extruder According to the angle between the flow direction of the head and the center line of the screw, the machine head is divided into a bevel head (120o angle) and a right angle head. The outer casing of the machine head is fixed on the fuselage by bolts. The mold in the machine head has a core sitting and is fixed to the inlet port of the machine head with a nut. The front of the core seat is equipped with a core, a core and a core holder. The center has a hole for passing the core wire; a pressure equalizing ring is arranged at the front of the machine head for equalizing the pressure; the extrusion molding part is composed of a die sleeve seat and a mold sleeve, and the position of the mold sleeve can be adjusted by the bolt through the support In order to adjust the relative position of the die sleeve to the core, it is convenient to adjust the uniformity of the thickness of the extrusion layer. The outside of the machine head is equipped with a heater.